Description: Made-to-measure Concept Cantilever Carport-Canopy
Concept Canopy is designed on a modular basis which means that you can increase the area of the cover at any time and there are no support- pillars needed, giving maximum protection for all the vehicles you are ever likely to own.
Your canopy will keep its good looks for years and years without continual upkeep. The tough translucent roof panels allow natural daylight through, so if your canopy is above your kitchen window, patio or living room, adequate daylight still enters your home.
The Concept Canopy has undergone rigorous testing procedures in simulated and actual installations over many years. Monitoring of test models is continuous and no component deterioration has been detected. Concept Canopy requires no ground preparation and in most cases planning permission is not necessary. It immediately becomes a welcome addition to any house or bungalow.
This Cantilever Carport-Canopy uses three made-to-measure beams. Enter projection required in millimetres i.e max = 2440mm
The beams with this roof system are finished on one side, please select your requirements for left or right handed beams. (When selecting, imagine you are standing in front of the canopy with your back towards the canopy)
Colour: White or Brown Beams
The roofing sheets are Opal 3-4mm thick, made of GRP (Glass Reinforced Plastic)
Max height of support arm 460mm, there needs to be 500mm clear brick work above the beams, or order 3 bungalow brackets (see link below) if clear brickwork is less than 500mm.
*Gutter & Fascias not supplied order separately
GRP Products are made to order. Ensure your measurements are correct and that you have chosen the right product for your needs. As they are made to order, GRP products are non-returnable.