32mm Solvent Weld

A light in weight yet strong and cost effective option, the FloPlast ABS SolventWeld System is available in 32mm, 40mm and 50mm sizes with an extensive range of fittings to meet most installation requirements.

Waste Systems Fixing Guide
Install and test system in accordance with BS EN 1610:1998.
 Fix pipe brackets at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm
 An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems.
 For solvent weld installations incorporate expansion ring seal couplings at relevant points for long pipe runs.
 It is recommended that ABS and Polypropylene waste systems where externally installed are protected against prolonged exposure to sunlight with exterior gloss paint.
 For solvent weld systems ensure the pipe is cut square, all swarf removed and cleaning fluid applied to both surfaces of joint. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing system.

Sort By:
Show:
Display: List Grid
  • 32mm x 3m Waste Pipe Waste Pipe
    Description:A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. Manufactured ..
    Ex Tax: £3.07 £3.69
  • 32mm 90 Waste Pipe Degree
    Description:32mm 90 degree knuckle bend. solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hour..
    Ex Tax: £0.61 £0.73
  • 32mm 90 Waste Pipe Degree Con
    Description:32mm 90 degree conversion bend. solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve h..
    Ex Tax: £0.61 £0.73
  • 32mm 90 Waste Pipe Degree swept
    Description:32mm 90 degree solvent weld swept bend. solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handlin..
    Ex Tax: £0.61 £0.73
  • 32mm 135 Waste Pipe Bend
    Description:32mm 135 degree solvent weld bend. solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and..
    Ex Tax: £0.61 £0.73
  • 32mm 135 Waste Pipe Branch
    Description:32mm 135 degree solvent weld branch. solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling a..
    Ex Tax: £1.17 £1.40
  • 32mm Waste Pipe Joint
    Description:32mm straight solvent weld joint. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours be..
    Ex Tax: £0.61 £0.73
  • 32mm Waste Pipe Clip
    Description:32mm solvent weld pipe clip. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before ..
    Ex Tax: £0.33 £0.39
  • 32mm Waste Pipe Tank Connector
    Description:32mm solvent weld tank connector. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours be..
    Ex Tax: £0.61 £0.73
  • 32mm Waste Pipe Tee
    Description:32mm solvent weld branch 90 degree. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours ..
    Ex Tax: £0.61 £0.73
  • 32mm Waste Pipe Access Plug
    Description:32mm Access Plug. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the..
    Ex Tax: £0.61 £0.73
  • 32mm x 40mm Waste Pipereducer
    Description:32mm x 40mm solvent weld reducer. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint. insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours be..
    Ex Tax: £0.61 £0.73
  • Everbuild Plumbers Gold
    Specially formulated for the plumbing professional, Plumbers Gold is a new type of sealant and adhesive based on hybrid polymer technology that offers outstanding adhesion to all sanitary, bathroom, wetroom, kitchen and plumbing materials.For example, hard plastics, acrylics, fibreglass, ceramic..
    Ex Tax: £6.99 £8.39