Roof - Felt RoofTX Optima

Daltex® RoofTX® Optima
Daltex® RoofTX® Optima is a 3-layer low resistance vapour permeable air barrier roofing underlay for pitched roof construction. Daltex® RoofTX® Ultra is also certified for use in walling.

Daltex® RoofTX® Optima is suitable for fully supported or unsupported applications and can be utilised in conventional ventilated roof constructions. Vapour permeable Daltex® RoofTX® Optima has the added advantage of being suitable for use in unventilated roofing applications, and is accredited via BBA Certificate 06/4334 and IAB Certificate 06/0237.

Daltex® RoofTX® Optima, with low vapour resistance, allows moisture to diffuse through the underlay. In warm pitched roofs and UK cold pitched roofs, and when Daltex® RoofTX® Optima is installed there is no need to ventilate the roof space, providing the fabric is installed in
accordance with the relevant Agrément Certificate.

 Air Barrier - Allows More Energy Efficient Design
   ■ Effective against wind driven rain, snow and dust
   ■ Excellent water vapour transmission properties
   ■ Excellent resistance to water penetration
   ■ Enhanced flammability resistance to EN 11925-2
   ■ Allows more energy efficient design
   ■ Durable, flexible & lightweight

RoofTX Optima 1.0m X 50m
VPU100DL92
!
sorry out of stock

Dimensions: 1.0m x 50m roll

Description:

Daltex® RoofTX® Optima, with low vapour resistance, allows moisture to diffuse through the underlay. In warm pitched roofs and UK cold pitched roofs, and when Daltex® RoofTX® Optima is installed there is no need to ventilate the roof space, providing the fabric is installed in
accordance with the relevant Agrément Certificate.

Technical Data:

Mass (per unit area) (EN 1849-2) : 92g/m²
Tensile Strength (EN 12310-1) : Machine: 270 N/50mm Cross: 145 N/50mm
Tear Resistance (EN 12310-1) : Machine: 110 N, Cross: 70 N
Water Vapour Transmission (EN 12572) : 1100 g/m2/24 hrs
Resistance to Water Penetration : (EN 1928) W1
Flame Retardancy (EN 13501-1) : Class D*  *When tested to EN 11925-2

RoofTX Optima 1.5m X 50m
VPU150DL92
!

Dimensions: 1.5m x 50m roll

Description:

Daltex® RoofTX® Optima, with low vapour resistance, allows moisture to diffuse through the underlay. In warm pitched roofs and UK cold pitched roofs, and when Daltex® RoofTX® Optima is installed there is no need to ventilate the roof space, providing the fabric is installed in
accordance with the relevant Agrément Certificate.

Technical Data:

Mass (per unit area) (EN 1849-2) : 92g/m²
Tensile Strength (EN 12310-1) : Machine: 270 N/50mm Cross: 145 N/50mm
Tear Resistance (EN 12310-1) : Machine: 110 N, Cross: 70 N
Water Vapour Transmission (EN 12572) : 1100 g/m2/24 hrs
Resistance to Water Penetration : (EN 1928) W1
Flame Retardancy (EN 13501-1) : Class D*  *When tested to EN 11925-2

More Information
!

Underlay for warm and cold pitched roofs
• Unventilated warm and vented cold roofs: BBA & IAB Certified
• Certified in the UK and Ireland for unventilated cold roofs
• Excellent resistance to water penetration
• Protects against wind driven rain, snow and dust
• Excellent water vapour transmission properties
• Enhanced flammability resistance to EN 11925-2
• Durable, flexible and lightweight
• Additionally certified for use as a breather membrane in timber framed walls (excluding Ireland)

 

Eaves Protection System
EPS
!
roof_ventilation1

Eaves Fascia Tray
The standard 1500mm FT150 trays are fixed above the fascia board form a lightweight rigid support for the lower edge of the underlay, which can be cut back short of the gutter.
 Formed from tough, rot-resistant rigid black thermoplastic. The FT150 is recommended for remedial and large roof areas for all slates and tiles.

A Type 3M Long BBA approved valley trough
HA30PK10
!
ha

Standard weight - 360mm width (1.82kg/m2)

Narrow Corodrain valley troughs for use with single lap tiles in limited applications. Both standard (type:HA) and heavy duty (type:AX). They incorporate sanded strips (min. width 35mm) for the mortar to bond to.

Sold in packs of 10

B Type 3M Long BBA approved valley trough
HB30PK10
!
hb
 
Standard Corodrain valley troughs for use with double lap slates and tiles, which are dry bedded. Both stardard (type:HB) and heavy duty (type:BX).
Sold in packs of 10

D-Valleys Heavy Duty (2.44kg/m2)
DX30PK10
!
hd
Standard Corodrain valley troughs for use with single lap tiles. Both standard(type;HD) and heavy duty (type:DX). They incoperate sanded strips (min. width 35mm) for the mortar to bond to. Sold in packs of 10

3.0m Long Abutment Soaker
AS30PK10
!
abutment
Provides a weatherproof protection between a sloping roof and a vertical abutment. The bonded sanded strip gives maximum mortar adhesion, and the two bars along the horizontal section prevent moisture entering the roofspace. Sold in packs of 10

Trade Roof Ladders
!

Trade Roof Ladder

Lightweight but combines the strength of a trade ladder with a heavy duty ridge hook.

Industrial non-slip rungs & box section stiles.

Robber covered bearer bars distributes weight evenly preventing damage to roof.

Available in single and double sections

Double sections fitted with safety catches.

 

Single Section

Code Closed Height Overall Length Weight Rungs
TRL130  - 2.95m 8.5kg 11
TRL135  - 3.45m 10.00kg 13
TRL140  - 3.95m 11.00kg 15
TRL145  - 4.50m 11.50kg 17
TRL150  - 4.97m 12.00kg 19
TRL155  - 5.46m 13.50kg 21

 

Two Section Extension

Code Closed Height Overall Length Weight Rungs
TRL230 2.94m 4.64m 14.00kg 11+9
TRL235 3.44m 5.64m 16.00kg 13+11
TRL240 3.94m 6.64m 18.00kg 15+13
TRL245 4.30m 7.67m 20.00kg 17+15
!
Order Hotline & Customer Care: 0117 971 9922
Lines open 8am - 6pm Mon - Fri & 8am - 5pm Sat
 
Stay in touch!

Join our forum, discuss projects & products, share your photos -

Click Here

Sign up for our email newsletter,

we'll keep you up  to date about new

products and special offers. Click Here

Get your hands on our latest catalogue,

packed with products and information -

Click Here