Anthracite vertical wall grey cladding makes your drab walls come alive with a modern new style look for cladding that catches the eye and lights up the outside.
This system opens wall cladding design options to a new level if you're searching for something new on your walls to maybe match to a composite door or add some straight lines vertical cladding from Durasid will not disappoint.
Good looking waterproof maintenance-free modern contemporary and in an anthracite 7016 grey.
Designed for external use but also suitable for internal feature walls.
The Anthracite Grey Cladding Edge Trim can be used to neaten cladding around windows or to start the first length of the cladding when it has been necessary to cut the lower edge of the cladding making the use of a starter trim impossible.
..
The Anthracite Grey Cladding Edge Trim can be used to neaten...
The Anthracite Grey uPVC Cladding 2-Part Corner Angle is used to return lengths of cladding around a 90-degree corner. This 2 part trim is easy to install by fixing the internal piece under the grey cladding, and the external part over the cladding. Provided as a 5m length. Quite sturdy at 16..
The Anthracite Grey uPVC Cladding 2-Part Corner Angle ...
Two-Part Edge Trim, snap down for easy installation this trim is used at the side of the cladding panel it provides a straight finished edge and also acts as an expansion joint.
The two-part trim is also used on the edges when the cladding has been cut at an angle. This helps to create a straight..
Two-Part Edge Trim, snap down for easy installation this tri...
Compatible with all other Durasid products, Original, Elegance, Natural, Vertical siding, Single siding and Double Siding and most other manufactures or plastic wall cladding systems.
This trim is hidden behind the cladding after it is installed
Only comes in white and are 5 metres in le..
Compatible with all other Durasid products, Original, Elegan...
Continuous ventilation trim in black for use on the lower edge and top edge of PVC wall cladding. Covers the gaps that need to be left for venting wall cladding to help reduce the number of insects that might get behind the cladding.
Multipurpose trim with all sorts of potential uses
A v..
Continuous ventilation trim in black for use on the lower ed...
Center H-Section Joint for Original Sidings. 16mm deep this produces a straight joint in the cladding which also acts as an expansion joint to form a panel looking finish
Anthracite Grey Colour
Comes in 5 metres
..
Center H-Section Joint for Original Sidings. 16mm deep this ...
Invisible vertical connector for the Durasid Original 167mm vertical sidings this connecting joint fits behind the cladding where there are joints in the lengths. it sits on the length of cladding below or the starter trim so it need to be fitted as the cladding is installed.
..
Invisible vertical connector for the Durasid Original 167mm ...
Two-part internal and external corner for Durasid Original sidings.
Comes in 5 metres.
6 colours to choose from to match perfectly with your sidings.
..
Two-part internal and external corner for Durasid Original s...
Lacquered aluminium corner. 20mm by 20mm and comes in 5 metres. The aluminium section is exposed on the corner to add strength in areas where the corner may gey knocked. The cladding is installed as normal and at 16mm plus the width of normal trims it should end up with a near flush finish.
..
Lacquered aluminium corner. 20mm by 20mm and comes in 5 metr...
Durasid lacquered aluminium corner profile for Durasid Original, Elegance and Natural. Aluminium corner angles add a professional touch to the corners of external cladding around doors and windows.
Comes in 5-metre lengths and are 50mm by 100mm.
Comes in all available colours from the Original..
Durasid lacquered aluminium corner profile for Durasid Origi...
Durasid corner profile for Original cladding.This anthracite grey corner angle profile has been designed for the short edge to be on the surface of the cladding and the long side to go into the reveal or windows and doors to avaiod the need of architraves and trims around the window.
50mm by 100m..
Durasid corner profile for Original cladding.This anthracite...
Stainless steel screws 30mm m3.5 suitable for use with PVC cladding or soffit and PVC edge trim where the fixings are hidden.
Freefoam Fortex Cladding Screw
M3.5 X 30mm X 250 approx
Stainless Steel
..
Stainless steel screws 30mm m3.5 suitable for use ...