Fascia and Soffit Replacement
PVC Full Replacement Boards - White Square Leg Bottom
Full replacement fascia boards can be used for refurbishment work on extensions or on new build properties. The board's thickness means it is strong enough to hold gutter brackets without the need for a backing timber. The top of the board is wide enough to hold an eaves tray but if you are fixing eaves trays to avoid dipping to the rear it is also prudent to install battens behind the fascia board.
RAL Colour: White 9010
Product Length Tolerance: +-5mm
All Sizes Available: 150mm, 175mm, 200mm, 225mm, 250mm, 300mm or 405mm
Product Thickness: 18mm
Return Leg: 38mm
Inside Leg: 27mm
Accreditations: BBA & BSI Approved
Product Type: PVC 16 mm Fascia Board
Softening Point: Cellular products fascias and soffits have a softening point in the region of 70 degrees C When tested to BS EN ISO 60 2000 Vicat 5kg load the result was 67degrees centigrade.
Tolerance +- 5mm
• BBA 09/4639 • BSI certification Kitemarked • BS 7619 Specification Kitemarked • Fire BS 476 Part 7, 1997 • BS 6105 compliant •Manufactured under ISO 9001 Quality Standard System
White fascia boards should have 5mm expansion gaps at both ends of a 5-meter length these expansion joints are achieved behind the corners and joiners. To allow for expansion these are best glued to one surface left or right on a fascia joint and on the side of the shortest board on a corner joint.
After delivery, do not store in direct sunlight remove the boards from the transit protective packing failure to do so will result in the boards bending if the heat in the packaging reaches 70 degrees.
After installation 9mm and 17mm boards look the same so a combination of both is possible.
We normally aim to deliver these boards within 3 - 5 days larger deliveries will be planned via our own transport system in busy times this can take a little longer.
Ordering need help or wish to discuss large contracts? please call us on 01179 719922