Grey 112mm Half Round Guttering

Floplast grey half round gutter / rainwater system is a practical, easy to install system.

Offering a cost-effective solution for both new build and refurbishment applications. 
Compatible with most major manufacturers.

Features : -
Good Flow Capacity 
Pre-Fitted Gutter Seal Retaining Clip System 
Pre-Lubricated Seals

 

Sort By:
Show:
Display: List Grid
  • Gutter Grey Half Round 112mm x 4m Guttering (RG4G)
        Description : Traditional Grey Half Round guttering, 4m long x 112 mm wide x 52mm depth.  Should be fitted at 1:350 fall for optimum flow rate.   Manufacturer : Floplast Colour : Grey. ..
        Description : Traditional Grey ...
    Ex Tax: £5.00 £6.00
  • Floplast 112mm Grey Half Round Universal 90º Gutter Angle (RA1G)
        Description : This Traditional Grey 90º Gutter Angle joint, allows you to take your guttering around a internal or external corner of 90º.  It is fitted with rubbers and clips at each end for a water tight seal.  This corner joint requires gutter clips to be fi..
        Description : This Traditional ...
    Ex Tax: £2.00 £2.40
  • Floplast 68mm Grey Round 4m Downpipe (RP4G)
    Description : Floplast 68mm Traditional Grey Round 4m downpipe fits straight onto fittings.. Manufacturer : Floplast Colour : Grey Dimensions : 68mm Diameter x 4m length   ..
    Description : Floplast 68mm Traditional Grey Round 4m d...
    Ex Tax: £7.04 £8.45
  • Floplast 112mm Grey Half Round 135º Gutter Angle (RA2G)
        Description : This is a 135º corner joint for use with 4m Floplast 112mm Grey guttering, it can be used for both internal and external corners.  With rubber seals and clips to form a water tight seal when fitted, gutter clips will be needed to be fitted to the gutte..
        Description : This is a 135º co...
    Ex Tax: £2.94 £3.53
  • Floplast 112mm Grey Half Round Gutter External Stop End (RE1G)
        Description : Floplast 112mm Traditional Grey Half Round Gutter External Stop End, fits directly on to the end of Floplast 112mm half round guttering.  They are fitted with a rubber and clip for a water tight seal.  Manufacturer : Floplast Colour : G..
        Description : Floplast 112mm Tr...
    Ex Tax: £1.09 £1.31
  • Floplast 112mm Grey Half Round Gutter Internal Stop End (RE2G)
        Description : Traditional Grey Internal Stop End for Floplast 112mm Half Round Gutter, these fit into the ends of Union joints or Running Outlets.  PLEASE NOTE: These do NOT fit into the gutter, use External Stopend to fit directly on to Floplast 112mm Half Round..
        Description : Traditional Grey ...
    Ex Tax: £0.73 £0.88
  • Floplast 112mm Grey Half Round Gutter Union Joint (RU1G)
        Description : Traditional Grey 112 mm Floplast Gutter Union / Joint, allows Floplast 112mm Half Round guttering to be joined together in a straight line.  Each unit has 3 fixing points, to allow easy installation, and no need for gutter support brackets either side...
        Description : Traditional Grey ...
    Ex Tax: £1.40 £1.68
  • Floplast 112mm Grey Half Round Gutter Fascias Bracket (RK1G)
        Description : Traditional Grey Gutter Brackets for use with Floplast 112mm Half Round Black Gutter -  (place at max 1 metre centres). Manufacturer : Floplast Colour : Grey. . ..
        Description : Traditional Grey ...
    Ex Tax: £0.61 £0.73
  • Floplast 112mm Grey Half Round Gutter to Cast Iron Adapter (RD5G)
        Description : Traditional Grey Half Round 112mm Gutter converter, this allows you to connect Floplast Half Round 112mm Guttering to existing half Round Cast Iron guttering. Fitted with a rubber and clip at the end for the Floplast gutter and 2 clips and a nut and bolt to..
        Description : Traditional Grey ...
    Ex Tax: £6.43 £7.72
  • Floplast 112mm Grey Half Round Gutter In Line Running Outlet (RO1G)
        Description : Floplast Traditional Grey In-Line Running Outlet for use with Floplast 112mm Half Round Guttering, connects to Floplast 68mm Downpipe.  Both sides fitted with Rubbers and Clips for a water tight seal. Manufacturer : Floplast Colour : Grey. ..
        Description : Floplast Traditio...
    Ex Tax: £1.70 £2.04
  • Floplast Grey Gutter Hopper (RHS1G)
    Description : Traditional Grey Universal hopper head fits 65mm square or 68mmround downpipes.  With two pre-formed fixing points to allow easy installation. Maximum flow rate 1.14 liters/second. Manufacturer : Floplast Colour : Grey     ..
    Description : Traditional Grey Universal hopper head fi...
    Ex Tax: £6.05 £7.26
  • Floplast 68mm Grey Round 2.5m Downpipe (RP2.5G)
    Description : Floplast 68mm Traditional Grey 2.5 m long downpipe fits straight onto fittings. Manufacturer : Floplast Colour : Grey Dimensions : 68mm Diameter x 2.5m length ..
    Description : Floplast 68mm Traditional Grey 2.5 m long...
    Ex Tax: £4.41 £5.29
  • Floplast 68mm Grey Round 90º DownPipe Bend (RB1G)
    Description : Floplast 68mm Traditional Grey Round 92.5 degree off set down pipe bend for use with Floplast 68mm round downpipe. Manufacturer : Floplast Colour : Grey   ..
    Description : Floplast 68mm Traditional Grey Round 92.5...
    Ex Tax: £1.90 £2.28
  • Floplast 68mm Grey Round Downpipe Pipe Joint (RS1G)
    Description : Floplast 68mm Traditional Grey round down pipe joiner for use with Floplast 68mm Round Downpipe. Manufacturer : Floplast Colour : Grey   . ..
    Description : Floplast 68mm Traditional Grey round down...
    Ex Tax: £0.96 £1.15
  • Floplast 68mm Grey Round Downpipe Bracket (RC1G)
    Description : Floplast Traditional Grey Round 68 mm Down pipe clip stand off, for use with Floplast 68mm Round Downpipe. Manufacturer : Floplast Colour : Grey . ..
    Description : Floplast Traditional Grey Round 68 mm Dow...
    Ex Tax: £0.76 £0.91
  • Floplast 68mm Grey Round  Downpipe Branch (RY1G)
    Description : Floplast 68mm Traditional Grey Round Downpipe 67.5º Branch, for use with Floplast 68mm Downpipes.  Manufacturer : Floplast Colour : Grey   ..
    Description : Floplast 68mm Traditional Grey Round Down...
    Ex Tax: £3.59 £4.31
  • Floplast 68mm Grey Round Downpipe 112º Off Set Bend (RB2G)
    Description : Floplast 68mm Traditional Grey112 degree off set down pipe bend for use with Floplast 68mm downpipes.  Normally bought in pairs and used to bring the downpipe from the running outlet in towards a wall and then back to a vertical postion. Manufacturer : Floplast Col..
    Description : Floplast 68mm Traditional Grey112 degree ...
    Ex Tax: £1.39 £1.67
  • Floplast 68mm Grey Round Downpipe Shoe (RB3G)
    Description : Floplast 68mm Traditional Grey Round downpipe shoe/spout for use with Floplast 68mm Downpipes.  Manufacturer : Floplast Colour : Grey ..
    Description : Floplast 68mm Traditional Grey Round down...
    Ex Tax: £1.28 £1.54
  • Floplast Universal Rainwater Adaptor (D96)
        Description : Floplast Universal rainwater 110mm adaptor. Accepts 65mm square and 68mm round downpipe. External rainwater downpipes can be connected directly to a surface water drain or. depending on the design. via a gully trap to the underground drainage system. ..
        Description : Floplast Universal rai...
    Ex Tax: £6.75 £8.10
  • 68mm - 50mm Downpipe Reducer Black  (R666B)
    Description : This 68mm Spigot to 50mm Spigot in Gloss Black allows you to convert down from a 68mm downpipe to a 50mm mini downpipe. Manufacturer : Hunter Colour : Black ..
    Description : This 68mm Spigot to 50mm Spigot in G...
    Ex Tax: £4.50 £5.40
    Based on 1 reviews.