Strong self-support roof glazing bars for polycarbonate sheets and double glazed units. (No timber supports required). These bars are designed to last with little or no maintenance they can be fitted with 25mm sheets or double glazed units. Available in white and wood grain colours.
Please note: for projections over 4.5m further supports maybe needed
Description:
Main Bar for 25mm Polycarbonate or 24mm Double Glazed Units
Pack includes one end cap & bolts.
Colour: Light Oak*
* Colour may vary from other "Oak Foiled" products
..
Description:
Main Bar for 25mm Polycarbonate or 24mm Doub...
Description:
Edge Bar for 25mm Polycarbonate or 24mm Double Glazed Units
Pack includes one end cap & bolts.
Colour: Light Oak*
* Colour may vary from other "Oak Foiled" products
..
Description:
Edge Bar for 25mm Polycarbonate or 24mm Doub...
Description:
Wall Plate 5°-30° variable for 25mm Polycarbonate or 24mm Double Glazed Units.
Pack includes top cap, bottom cap and fittings..
Colour: Light Oak*
* Colour may vary from other "Oak Foiled" products
..
Description:
Wall Plate 5°-30° variable for 25mm Polycarb...
Description:
Eaves Beam for 25mm Polycarbonate or 24mm Double Glazed Units
Pack includes guttering & fittings.
Colour: Light Oak*
* Colour may vary from other "Oak Foiled" products
..
Description:
Eaves Beam for 25mm Polycarbonate or 24mm Do...
Description: Pack of 2 38mm Hex Drive Bolts for self support roof bars.
Use: To bolt bars to wall plate and eaves beam. 2 Bolts per bar. (1 x top and 1 x bottom)
Quantity: Pack of 2
..
Description: Pack of 2 38mm Hex Drive Bolts for self support...
2.1m sheet closure.
Use on the bottom edge of the sheets on top of the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape)
..
2.1m sheet closure.
Use on the bottom edge of the sheets ...