To Fit 10mm 16mm and 25mm Timber Supported Polycarbonate Roof Bars Click Here

Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same length as the polycarbonate sheet.

Drill holes to suit a 5mm wood screw in the centre of the aluminium base between the toothed legs. The holes should be 100mm from each end and at no greater than 500mm intervals.

Screw aluminium bases to rafters using wood screws.

Lay polycarbonate sheets on rafters starting at one end. When all sheets are in position, remove the protective film and fit the uPVC top section by pushing the legs into the slots provided in the aluminium base. Push firmly home to ensure adequate seal.

Fit endcaps to uPVC top capping. Fit end closure to polycarbonate sheet.

 

 

Sort By:
Show:
Display: List Grid
  • 2.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 2m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same le..
    Description Available in white or brown pack includes one en...
    Ex Tax: £9.18 £11.02
  • 2.0m Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 2m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same le..
    Description Available in white or brown pack includes one en...
    Ex Tax: £8.25 £9.90
  • 2.5m  Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 2.5m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £10.25 £12.30
    Based on 1 reviews.
  • 2.5m  Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 2.5m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £10.25 £12.30
  • 3.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 3.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £12.25 £14.70
  • 3.0m Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 3.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £12.25 £14.70
  • 4.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 4.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £15.99 £19.19
  • 4.0m Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 4.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £15.99 £19.19
  • 5.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 5.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £19.50 £23.40
  • 5.0m Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 5.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £19.50 £23.40
  • 6.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 6.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £24.16 £28.99
  • 6.0m Timber Supported White Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 6.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £24.16 £28.99
  • 7.0m Timber Supported Brown Snap Down Bar 10-25mm Polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 7.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £39.80 £47.76
  • 7.0m Timber Supported White Snap Down Bar 10-25mm polycarbonate
    Description Available in white or brown pack includes one end cap. Dimensions: Bar base size is 45mm wide x 7.0m long Measure and cut the polycarbonate sheet to length allowing an extension of approximately 50mm to overhang the gutter. Cut the aluminium base section and uPVC top section to the same ..
    Description Available in white or brown pack includes one en...
    Ex Tax: £39.80 £47.76
  • 35mm, 3m - Aluminium Snap Down F Section / Edge Trim - White or Brown
    This trim needs to be fitted in to one of the above bars Dimensions: 3m Lengths, 35mm Colour: White or Brown ..
    This trim needs to be fitted in to one of the above bars ...
    Ex Tax: £34.55 £41.46
  • Snap Down 3m Edge Trim - White or Brown
    Description This trim needs to be fitted in to one of the above bars Dimensions: 3m Lengths, 10mm, 16mm or 25mm 35mm Colour: White or Brown ..
    Description This trim needs to be fitted in to one of the...
    Ex Tax: £9.75 £11.70
  • Snap Down 4m Edge Trim - White or Brown
    Description This trim needs to be fitted in to one of the above bars Dimensions: 4m Lengths, 10mm, 16mm or 25mm Colour: White or Brown ..
    Description This trim needs to be fitted in to one of the ab...
    Ex Tax: £9.29 £11.14
  • Snap Down End Cap White or Brown
    Description 1 x end cap. Available in white or brown. Note: Bar not included ..
    Description 1 x end cap. Available in white or brown. Note: ...
    Ex Tax: £1.60 £1.92
  • 16mm Polycarbonate Sheet End Closure - White or Brown
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 16mm x 2.1m Colours: Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £4.69 £5.63
  • 25mm / 35mm Polycarbonate Roof Sheet Closure - White or Brown
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 25mm x 2.1m Colours: Available in White or Brown Dimensions: 35mm x 2.1m Colours: Ava..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £6.01 £7.21
  • 10mm Polycarbonate Sheet End Closure - White
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 10mm x 2.1m in White Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £3.81 £4.57
  • 10mm Polycarbonate Sheet End Closure - Brown
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 10mm x 2.1m in Brown Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £3.81 £4.57
  • 16mm Polycarbonate Sheet End Closure - White
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 16mm x 2.1m in White Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £4.69 £5.63
  • 16mm Polycarbonate Sheet End Closure - Brown
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 16mm x 2.1m in Brown Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £4.69 £5.63
  • 25mm Polycarbonate Sheet End Closure - White
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 25mm x 2.1m in White Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £6.99 £8.39
  • 25mm Polycarbonate Sheet End Closure - Brown
    Description: Sheet closure. Use with twin wall sheets, use on the bottom edge of the sheets, this clips over the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape) Dimensions: 25mm x 2.1m in Brown Available in White or Brown. ..
    Description: Sheet closure. Use with twin wall sheets, use o...
    Ex Tax: £6.99 £8.39
  • Polycarbonate Fixing Buttons
    Description: Polycarbonate Fixing Buttons. Sizes: Available to suit 10mm 16mm 25mm and 35mm sheets in white or brown. ..
    Description: Polycarbonate Fixing Buttons. Sizes: Availab...
    Ex Tax: £0.42 £0.50
  • 1m x Polycarbonate Anti Dust Tape
    Description: Solid Anti Dust Tape Use: Solid tape use at top of polycarbonate sheets Colour: Silver Dimensions: Price is per metre ..
    Description: Solid Anti Dust Tape Use: Solid tape use at ...
    Ex Tax: £0.71 £0.85
  • 1m x Polycarbonate Vented Anti Dust Tape
    Description: Vented Anti Dust Tape Use: Vented tape, use on the bottom of polycarbonate sheets Colour: Blue Dimensions: Price is per metre ..
    Description: Vented Anti Dust Tape Use: Vented tape, use ...
    Ex Tax: £0.91 £1.10
  • Black Jack Flashing 100mm
    Self adhesive flashing with a natural lead look finish 100mm x 10m roll ..
    Self adhesive flashing with a natural lead look finish 100mm...
    Ex Tax: £13.88 £16.66
  • Black Jack Flashing 150mm
    Self adhesive flashing with a natural lead look finish 150mm x 10m roll ..
    Self adhesive flashing with a natural lead look finish 150mm...
    Ex Tax: £17.98 £21.58
  • Black Jack Flashing 225mm
    Self adhesive flashing with a natural lead look finish 225mm x 10m roll ..
    Self adhesive flashing with a natural lead look finish 225mm...
    Ex Tax: £23.90 £28.68
  • Extendable Roof Vent Handle Winder Chrome Effect
    Extendable Roof Vent Handle Winder Overall Length 127cm Extends to 187cm (including handle & hook)  Perfect for opening a vent upto 3m high Colour : Chrome Effect ..
    Extendable Roof Vent Handle Winder Overall Length 127cm E...
    Ex Tax: £21.01 £25.22
  • 8X11/4
    Economy Cross Recess Woodscrews Posi Drive (approx box 200) ..
    Economy Cross Recess Woodscrews Posi Drive (approx box ...
    Ex Tax: £2.99 £3.59