ABOUT Ultrasky

UltraSky roof light will add the feeling of space and natural lights into your home.

Whether it's for your living room, dining room, bedroom or bathroom. UltraSky will be an excellent solution to brighten up the room with style. UltraSky roof light is stunning, enhancing any style of property by tradition or modern styling. Reducing the need for chunky roof ridges and maximising the amount of glass to allow light to flood into your room.

UltraSky roof comes in rectangular sizes ranging from 1m x 1.5m to 2m x 4m and is the fixed angle at 25º degrees.

Frame and colour options are also available. You can choose from 3 colours, 2 types of frame material and the ability to mix and match by externally and internally. Internally the lantern roof is white or it can be upgraded to satin black or anthracite grey to either match or contrast the external finish.

Double glazing for the reduction of heat loss and noise pollution while bringing all the glorious sunshine.

Extras - add roof vents for extra fresh air. Available with a manual opener, automatic opener and/or with rain and temperature control. (Roof vents are available only in selected sizes)

Made to measure are plus 10% VAT.

For made to measure UltraSky skylight. Please call us on 0117 971 99 22.

Click Here for set-out dimensions, overall dimension and installation guide




Installed on a new build extension, Orangery, or inserted into an existing flat roof, you will add the feeling of space and natural light to your home.

Whether it is for a living room, dining room, kitchen, bedroom or bathroom the perfect stylish solution for you. Stunning, enhancing any style of property, traditional or modern alike. It reduces the need for a chunky roof ridge and maximises the amount of glass that allows light to flood into your room.

SIZES. available in a number of bespoke rectangular sizes ranging from 1000mm x 1500mm to 4000m x 5850m.

COLOUR OPTIONS. Choose the stylish White PVC option to match your modern window frames, or for that extra Wow factor go for the Aluminium option, available in White, Anthracite Grey or Satin Black. Internally the lantern roof is clad in white PVC or upgraded to anthracite grey or satin black to either match or contrast the external finish.

GLAZING. The highly thermally efficient glazing options will help reduce heat loss and noise pollution, whilst letting the desired amount of light into your room.

EXTRAS. Add a roof vent to let in the fresh air. Roof vents are available with a manual opener, automatic opener or an automatic opener with rain and temperature control. * (roof vents only available in selected sizes).

KEY PERFORMANCE CRITERIA. Rectangular double-ended with a width from 1000-4000*mm and a length from 1500-5850*mm.

Thermally broken aluminium ridge body. 25 degree fixed pitch to all four sides.

Glazing bar top caps in either chambered PVC (white only) or Aluminium (White RAL 9003 80% gloss, Anthracite Grey RAL 7016 30% gloss and Satin Black RAL 9005 60% gloss).

Internal Claddings in PVC or Aluminium available in White, Grey or Black

Internal Aluminium claddings are factory filled with insulation further enhancing thermal performance

Low profile eaves beam (no gutter) designed to be fitted with oversailing 24mm double glazed units (high-performance low e, self-cleaning and solar control in blue or neutral/clear - units can be supplied.

UltraSky Lantern is designed around maximum uninterrupted sightlines, bar numbers are reduced (or can be added if you prefer) and the ridge board and hub ends are as unobtrusive as possible.

The thermal performance has been optimised to make it suitable for extensions in domestic properties. Typical U value with 1.1 glass for a 1000mm wide x 2000mm long is 1.4 W/m2K.

*Width and length are defined as to the external face of the timber kerb (not supplied, recommended to be 150mm high x minimum of 70mm wide)


Select from the design options below for prices and ordering

Sort By:
Display: List Grid
  • Full Glass Aluminium | Sizes | All Size
      Sizes Refer to External Face of Timber Support (Click to View) Minimum Sizes |  Width 670mm | Length 750mm Maximum Sizes | Width 1500mm | Length 3000mm ||| All Stratus sizes refer to the external face of timber support ||| View PDF Design Guide View PDF Installation..
      Sizes Refer to External Face of Timber Support...
    Ex Tax: £423.35 £508.02