300mm Vented Soffit Flat Board Black Ash

Black In Line Running Outlet Gloss Black In-Line Running Outlet for use with Floplast 112mm Half Round Guttering, connects to Floplast 68mm Downpipe.  Both sides fitted with Rubbers and Clips for a water tight seal. 112mm Black Gutter - In Line Running Outlet connects the guttering to the down pipes. This outlet is the inline version where water can flow in to it from both sides.Manufacturer : AquaflowColour : Black...

Description: 68 mm Gloss Black Round downpipe shoe/spout for use with Floplast 68 mm DownpipesColour: Black..

Description:  Traditionally Classic Gloss Black Down pipe clip with fixing lugs add that traditional finishing touch to your downpipes, and to complete the effect why not use FC50 fixings (see link below)Colour: Black..

Description: 112 degrees offset down pipe bend for use with 68 mm down pipes. Normally bought in pairs and used to bring the down pipe from the running outlet in towards a wall and then back to a vertical position. Also called swan necks.Manufacturer: AquaflowColour: BlackWant to order by telephone. We are here to help. Please call 0117 971 99 22 Weekdays 8 am - 4.30 pmWe deliver nationwide normal delivery time 1-2 days for this product...

This gloss black downpipe shoe with fixed lugs gives your downpipes a more traditional classic look. It fits a 68mm round downpipe. To finish off the look, why not use the 12 gauge x 50nn stainless steel Black-Capped fixings (FC50—sold in packs of 10)—see the link below.Manufacturer : Colour: Black..

Hollow Soffit Board WhiteThe white 300mm hollow soffit tongue and groove boards provide classic building solutions for homeowners and contractors throughout Bristol and Bath, featuring a clean white finish combined with precision-engineered tongue and groove joints that ensure seamless installation and superior weather protection for both traditional and contemporary properties. These premium boards are engineered with a lightweight, hollow construction that maintains structural integrity while ..

White 90º Corners for Ogee (product code E300OGXCSW). This finishing piece covers the matching board joint or corner. Check the profile, colour and dimensions against the board being fitted before ordering. Description:Stick On Fascia corners 90 degree..

Joints for Ogee (product code E300OGJSW). This finishing piece covers the matching board joint or corner. Check the profile, colour and dimensions against the board being fitted before ordering. Description:Ogee Facsia Joints 300mm singles..

90 Internal Corners for Ogee (product code E300OGICSW). This finishing piece covers the matching board joint or corner. Check the profile, colour and dimensions against the board being fitted before ordering. Description:Stick On Fascia corners 90 degree..

Description:Stick On Fascia cornersDimensions300mm long (cut to size)Colour:White..

40mm Black Fascia PinsDescriptionBlack fascia pins for use with wood grain effect or plain boards 40mm long for fixing cover fascia boards directly onto timber. Boards should be double nailed with the fixing kept up behind the gutterings. When fixing soffits fix the top row of nails first followed by the soffit boards then add the lower row of nails. This makes getting the soffit board in easier and speeds installation. Nails are title hold.Manufacturer: FreefoamProduct Length:40mmProduct M..

Black Fascia Nails 65mmDescription65mm Blacktop Nails for use with Black Ash and Plain Black 16mm 18mm and 22mm fascia boards. The average content of 100 pieces of pins per box.65mm Stainless steel black-headed nails average contents 100 pinsBlack fascia nails 65mm long for fixing replacement fascia boards directly into the joist end boards should be double nailed with the fixing kept up behind the gutterings. When fixing soffits fix the top row of nails first followed by the soffit boa..

Black Soffit Joint Trim Grained FinishScrews go into the long leg of the trim where the board will cover them so this starter trim edge trim gives you a hidden fix finish these trims can be nailed or screwed in to place.Product Length: 5mAccreditations: BSI ApprovedGuarantees: 10 YearsProduct Type: uPVC Black Ash Soffit J-Trim..

Black Ash H-Section Soffit Joint Trim 10mmWoodgrain effect H-Section for use with hollow soffit, flat boards and vented flat boards Black Ash soffit H trim 5m x 10mm this trim, also called a joint trim, is used to fix both hollow and solid soffit to reduce the number of fixings that show.Product Length: 2.495m +-5mmAccreditations: BSI ApprovedGuarantees: 10 YearsProduct Type: Black Ash uPVC H-Trim..

Black 68mm Round Disc Vents (product code E70DSVBP). These round soffit vents provide ventilation openings in a compatible soffit arrangement. Check the stated diameter and the roof’s ventilation requirements when planning the number and position of vents. Description:68mm round soffit vents BlackDimensions:68mm diameter..