FloPlast

Description : Traditional Anthracite Grey Round 68 mm Down pipe clip stand off, for use with Floplast 68mm Round Downpipe.Manufacturer : Colour : Anthracite Grey...

Soil Pipe 92.5º Access Branch Black (product code SP502B). This fitting changes or joins the pipe route at the stated angle. Match the pipe system and connection dimensions, and check the orientation needed for the installation. Description: (SP502B) Black 92.5 Degree Access BranchColour: Black..

110mm Underground Drain Access Pipe Socket Spigot For use where access is required in a straight section. such as the base of a soil stack. uPVC Pipe.Dimensions: 110mmColour: Terracotta/Brown Features:Fits 110mm Pipes Ring Seal Joints Suitable for Gravity Drainage & Sewerage Install to Depths of 10-metres..

Description : 160mm x 110mm 87.5° Unequal Junction - 6D198Manufacturer: ..

Description : Anthracite Grey Round 112° Downpipe BranchManufacturer : Colour : Anthracite Grey..

Screwed Access Grey Cap Access caps allow a simple connection for rodding eyes to gain easy access if required. The cap is a screw-on design that is airtight. These caps may never get used but some areas of drainage system pipes are still best covered just in case.These caps are often used by plumbers to form tube carriers for the vanFloplast (SP292G)Screwed Access CapColour: Grey..

110mm Under Ground Pipe Screwed Access Cap - D292Underground Screwed Access Cap For use at the end of a pipe run or at a branch to create an access point.uPVC pipe.Dimensions: 110mmColour: Terracotta/BrownFeatures:Fits 110mm Pipes Suitable for Gravity Drainage & Sewerage Install to Depths of 10-metres..

Description : 160mm x 160mm 90 Degree Chamber base with two 45 degree 110mm inlets.Use a proprietary adhesive such as Siroflex MS Polymer to seal the first riser to the base.Manufacturer: ..

Square Downpipe Access Point Black provides essential maintenance capability and inspection access for downpipe systems in challenging installation locations where pipe dismantling is restricted. This specialised access fitting allows you to inspect or clean pipes without taking them apart, making it invaluable for installations where pipes run through concrete foundations, structural walls, or other permanent fixtures that prevent normal joint movement and system dismantling. Designed for profe..

Description :  112 degree Adjustable offset downpipe bend for use with  65mm  square downpipes. This two piece offset bend can be cut to size, marked in increments of 5mm, from 25m to 65mm. Allowing for variable distances between the running outlet and the downpipe against the wall.Manufacturer : Colour : Brown..

Description : 68mm Traditional Anthracite Grey112 degree off set down pipe bend for use with  68mm downpipes.  Normally bought in pairs and used to bring the downpipe from the running outlet in towards a wall and then back to a vertical postion.Manufacturer : Colour : Anthracite Grey..

Description: (SP292B)Access cap for a 4 inch black 110mm pipe these are used as access points after the installation is complete.Black Screwed Access CapColour: Black..

Description: Round Gloss Brown Downpipe Access Pipe. Used to allow access to downpipe for blockage inspection- without the need to access from the top.Colour: Brown..

Description:  (SP561G) Soil Pipe 90 Degree Bend Double Socket. Lightweight Offset Bend manufactured from PVC-U for strength and durability. Easy to work with and suitable for high temperature waste discharges. The use of silicone lubricant on all seals will facilitate jointing.Dimensions: 110mm / 90 degreesColour: Grey...

Description : 68mm Traditional Anthracite Grey Round downpipe shoe/spout for use with Floplast 68mm Downpipes. Manufacturer : Colour : Anthracite Grey..

Description: (SP162G) Soil Pipe 112 Degree Bend. Lightweight Offset Bend manufactured from PVC-U for strength and durability. Easy to work with and suitable for high-temperature waste discharges. The use of silicone lubricant on all seals will facilitate jointing.Dimensions: 110mm / 90 degreesColour: Grey..

65mm Black Square Downpipe Adjustable Offset Bend (RBS5B) 112 degree Adjustable offset downpipe bend for use with 65mm  square downpipes. This two piece offset bend can be cut to size, marked in increments of 5mm, from 25m to 65mm. Allowing for variable distances between the running outlet and the downpipe against the wall.Manufacturer : FloplastColour : Black..

Description : Give your downpipes a more traditionally classic look with this Gloss White Downpipe Shoe with fixing lugs, fits  65mm Square downpipe, and to finish off the look why not use the 12 gauge x 50nn stainless steel Black Capped fixings (FC50 - sold in packs of 10) - see link below.Manufacturer : Colour : White..

This gloss black downpipe shoe with fixed lugs gives your downpipes a more traditional classic look. It fits a 68mm round downpipe. To finish off the look, why not use the 12 gauge x 50nn stainless steel Black-Capped fixings (FC50—sold in packs of 10)—see the link below.Manufacturer : Colour: Black..

Rodding Eye Square Black Socketed 110mm.Underground Rodding Eye square air tight and socketed 45° squareRodding Point with sealed access cover. For use on drainage and rainwater systems. Socketed for connection to 110mm drain pipes   pipes.45° rodding point with sealed access cover suitable for loading up to10 kN (1 tonne) where the cover is supported by a concrete plinthDimensions: H x W x D: 205 x 165 x 145mm. Weight: 0.7kgFeatures: 110mm uPVC Suitable for Gravity Drainage & S..

Description: (SP296B) Black Socket PlugPlug for 110mm black soil pipes is used to protect the system from foreign bodies during construction works or to blank the end of a pipe.Colour: Black..

Description: Round Gloss Black 68mm Downpipe Access Pipe. Used to allow access to downpipe for blockage inspection without the need to access from the top.Colour: Black..

110mm Under Ground  Pipe Universal Gully Trap and  Square Hopper with Grid - D500+D504Designed to hold water to stop foul air escaping from the drainage system.socket/spigot 45°Colour: Terracotta/Brown and BlackDimensions:110mm/45 degreeFeatures uPVClightweight and easy to work with strong ,durable ..

Description: Traditionally Classic Gloss White Downpipe clip with fixing lugs, add that traditional finishing touch to your downpipes, and to complete the effect why not use FC50 fixings (see link below).Manufacturer : Colour: White..