Menu
Your Cart

Eaves Felt Support Tray Eaves Protector 1.5-metre length

Eaves Felt Support Tray Eaves Protector 1.5-metre length
Eaves Felt Support Tray Eaves Protector 1.5-metre length
Eaves Felt Support Tray Eaves Protector 1.5-metre length
Eaves Felt Support Tray Eaves Protector 1.5-metre length
Eaves Felt Support Tray Eaves Protector 1.5-metre length
  • Stock: In Stock
  • Model: FT150
  • SKU: FT150
  • MPN: FT150
197428 products sold
Product Views: 1328
£2.84
Ex Tax: £2.37

Eaves Tray Eaves Protector Felt Support

Eaves system trays replace the roof underlay felt edge that protrudes out of the roof and into the guttering Protecting the timber eaves from water penetration behind the fascia board.

The standard 1400 mm FT150 trays are fixed above onto the front timber or uPVC board they form lightweight rigid support for the lower edge of the underlay, which can be cut back short of the gutter.

Formed from tough, rot-resistant rigid black thermoplastic. The FT150 is recommended for remedial and large roof areas for all slates and tiles.

Eaves Felt Support Tray Technical Information

Approx 1.5m lengths which provide coverage of 1.4m when installed like most systems these trays need backing battens which then allow them to be used as an eaves support tray and prevent felt from sagging at eaves level. 

These trays allow the felt to be cut beneath the roof tile which protects your roofing underlay from UV damage.

Breathable roofing felt is manufactured to be lightweight and easy to handle.

Maintenance is Very simple once installed the eaves need a very checked. Solvents and abrasives should be avoided.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Shop departments
Not sure what you need?Can't find the part? Ask our team →Call 0117 971 9922