The White 9mm Cover Board is also known as uPVC Cap-over fascias or cappit board. Typically used to cover existing timber fascias or bargeboards which are in good sound condition and replacement uPVC fascia installations where timber or plywood backing boards are used. These 9mm Cover boards are 5m in length.
Standard 9mm Reveal Liner Fascia Cover Board
Plastic fascia to go on to timber.
Dimensions: 9mm x 150mm Internal x 5m
Internal Leg Size 27mm&..
Full replacement fascia boards can be used for refurbishment work on extensions or on new build properties. The board's thickness means it is strong enough to hold gutter brackets without the need for a backing timber. The top of the board is wide enough to hold an eaves tray but if you are fixing eaves trays to avoid dipping to the rear it is also prudent to install battens behind the fascia board.
Dimensions: 16 mm x 5 m x 150 mm
Flat UPVC Plastic Soffit / flat board / General purpose board. Use as soffits under the eaves of your roof or as a general purpose flat board, use 30mm Pins to fix or an edge channel if you wish to avoid pins showing.
9mm x 100mm x 5m..
300mm Slimline External 135° Corner Joint for K16 / KF16 / 605
The 300mm slimline external corner joint is available in brilliant white and suitable for the K16 Flush fascia Board
300mm Slimline External 135°..
Double external fascia corners, this can be cut into two halves two produce two corners at 250mm long or it can produce a single corner at 495mm long useful when completing box ends.
Silicone Lubricant Makes fitting the gutters into the joints very simple. Plus lots of other helpful purposes about the house.
Description: Everbuild All Purpose Silicone Spray makes fitting the gutters into the joints very simple. Plus lots of other jobs about the house.
• Silicone release agent for easing friction between two surfaces
• Non-stick and colourless
•Ideal for rubber gasket installation and for mould making industries
•Safe for use ..
450 Builders Silicone is a premium quality low modulus non-corrosive neutral cure silicone sealant that adheres to virtually all substrates, both porous and non-porous.
Typically used for construction expansion joints and perimeter pointing of all types of door and window frames.
Conforms to ISO 11600 class: F 25LM...
30% Time Saving over conventional dry wall adhesives.
Board only needs holding for 1 minute
Can be plastered in ONE HOUR
No Heavy Bags to carry
1 can fixes 5 standard boards
Can be applied to board or wall
Works on solid walls, metal & timber studding
Timed delay prevents post expansion once in position
Helps to reduce cold bridging
No nails or screws.
Stelmax 1985 Adhesive Contact Glue Clear 1985 Adhesive is used extensively within the window industry for the installation of frames and attachment
Stelmax 1985 Adhesive is an easily applied PVC resin and solvent based mix which bonds readily to form maintenance free joints of exceptional strength when used to bond both plasticised and rigid PVC and ABS. 1985 Adhesive is used extensively within the window industry for the installation of frames and attachments and i..
Eaves Tray Eaves ProtectorEaves system trays replace the roof underlay felt edge that protrudes out of the roof and into the guttering Protecting the timber eaves from water penetration behind the fascia board.The standard 1400 mm FT150 trays are fixed above the fascia board form lightweight rigid support for the lower edge of the underlay, which can be cut back short of the gutter.Formed from tough, rot-resistant rigid black thermoplastic. The FT150 is recommended for remedial and large roof ar..
Black fascia board pins 30mm for fixing PVC boards up to 10mm thick. Stainless steel pin with a plastic top.
Stainless steel black-headed nails for 9mm Soffit uPVC plastic boards
average contents 100 pins..