110mm Drainage Pipe Socketed Floplast - D143

110mm Drainage Pipe Socketed 3m

Underground Drainage Systems are designed for use in gravity drainage and sewerage installations at depths of up to ten metres. Composition All drainage pipes and the majority of fittings are manufactured from un-plasticised Polyvinyl Chloride (uPVC).

Colour Pipes and fittings for underground use are manufactured in golden brown/terracotta.

110mm underground drain pipe 3m socketed - D143 All underground pipe and fittings are manufactured to BS4660/EN1401-1.

Dimensions 3-metre Length by 110mm diameter.

100mm - 80mm Land Drainage Multi-Junction Branch Black

Perforated Land Drain Pipe Y Branch 100mm or 80mmDescription :100mm Land Drainage Coupling BlackLand Drainage is used to remove excess water from fields and gardens, in fact, any area where excessive water is a problem.The perforations allow seeping water to ingress the pipe, capillary action then maintains the water within the pipe allowing it to flow to its destination i.e. stormwater attenuation Tanks, also known as Modular Plastic Geo Cellular Units (egg crates) or a watercourse ..

£19.39

Ex Tax:£16.16

Underground Drainage Pipe 110mm 3m Plain - D043

Underground 110mm Drainage Pipe Plain 3-metres Underground Drainage Systems are designed for use in gravity drainage and sewerage installations at depths of up to ten metres. Composition plastic drainage pipes and the majority of fittings are manufactured from un-plasticised Polyvinyl Chloride (uPVC). Colour Golden Brown (not UV resistant) Pipes and fittings for underground use are manufactured in golden brown/Terracotta. 110mm Ground drain pipe 3m plain - D043 All underground pipe and fitti..

£31.54

Ex Tax:£26.28

110mm Pipe Coupling Double Socket - D105

110mm Under Ground Pipe Coupling/Union Double Socket - D105Pipe Coupling Double Socket. Joins two plain-ended underground pipes together. Strong. durable uPVC. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing. BS 4660 BS EN 1401-1 1998.Colour: Terracotta/BrownDiameter:110mmFeatures Suitable for High-Temperature Waste DischargesFits 110mm Pipes Ring Seal Joints S..

£8.54

Ex Tax:£7.12

110mm Pipe Single Socket Bend 87.5° - D161

110mm Under Ground Pipe Single Socket Bend 87.5° - D161Single Socket Bend 87.5 Degree. Socket to spigot. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing. Pipe uPVC.Colour: Terracotta/BrownDimensions 110mm / 87.5°Features Suitable for High-Temperature Waste Discharges Fits 110mm Pipes Ring Seal Joints Suitable for Gravity Drainage Sewerage Install to Depths of 10-metres..

£12.65

Ex Tax:£10.54

110mm Pipe Single Socket Bend 45° -D163

110mm Under Ground Pipe Single Socket Bend 45° - D163The Single Socket Bend 45 Degree in terracotta/brown provides essential directional change capability for 110mm drainage systems, featuring a socket to spigot connection that ensures reliable pipe routing around obstacles and through building structures. This professional-grade fitting incorporates an innovatively designed push-fit joint system with advanced seal and snap-cap technology that guarantees watertight connections while simplify..

£15.14

Ex Tax:£12.62

Black Gutter - Half Round - 112mm x 4m Guttering

Black Round Gutters 112mm Stylish Gloss Black Half Round guttering, 4m long x 112 mm wide x 52mm depth. Should be fitted at 1:350 fall for optimum flow rate. The most popular choice of gutter colour these black gutters are in a standard design which has been in use for many years the black half round gutter system in 4m lengths. This standard 112mm .Manufacturer:AquaflowColour: Black..

£10.79

Ex Tax:£8.99

Black Round Downpipe 2.5m

Black 68 mm Round 2.5 m Down Pipe 68 mm Gloss Black 2.5 m long downpipe fits straight onto fittings.Colour: BlackDimensions: 68 mm diameter x 2.5 m length..

£7.50

Ex Tax:£6.25

112mm Black Round Stop End Outlet

112mm Black Half Round Gutter Stop End Outlet 112mm Gloss Black StopEnd Outlet gets pipes in close to walls. This is for use with Floplast 112mm Half Round Gutter and 68mm downpipe. A fixing point on each side will be drilled out on whichever side you want to fix it on.Manufacturer: Aqua flowColour: Black..

£3.36

Ex Tax:£2.80

112mm Black Round Union / Joint

112mm Black Half Round Gutter Union / JointThe Gloss Black 112 mm Gutter Union Joint allows 112mm Half-Round guttering to be joined together in a straight line. Each unit has three fixing points for easy installation, and gutter support brackets on either side are not needed. It is fitted with rubbers and clips for a watertight seal.Manufacturer: Aquaflow Colour: Black..

£2.16

Ex Tax:£1.80

112mm Black Round Universal 90º Angle

112mm Black Half Round Universal 90º Gutter Angle This Gloss Black 90º Gutter Angle joint, allows you to take your guttering around an internal or external corner of 90º. It is fitted with rubbers and clips at each end for a watertight seal. This corner joint requires gutter clips to be fitted to the gutter either side for support. Manufacturer : Aquaflow &nb..

£3.60

Ex Tax:£3.00

White Square To 112mm Half Round Adapter (RDS1W)

White Square To 112mm Half Round Adapter (RDS1W)Use to join plastic 114mm square gutter onto plastic 112 mm Half Round guttering.Colour: White ADS1..

£7.09

Ex Tax:£5.91

White Round to Cast Iron Adapter (RD5W)

White Round to Cast Iron Adapter (RD5W)Gloss White Half Round 112mm Gutter converter, this allows you to connect Half Round 112mm Guttering to existing half Round Cast Iron guttering. Fitted with a rubber and clip at the end for the gutter and 2 clips and a nut and bolt to attached the cast iron side, it is recommended that you use a Roof and Gutter sealant to seal this joint (link below for sealant).Colour: White..

£11.99

Ex Tax:£9.99

Rafter Gutter Brackets Floplast (RR2) Galvanised

Side Rafter Gutter Brackets (RR2) GalvanisedSide rafter bracket for use on properties with overhanging tiles and exposed joist Galvanised silver finish. The rafter bracket can be used with round square and deep flow systems. The fall of the guttering can be adjusted via the bracket making installation easier.It is supplied with a bolt wing nut and washer.InstallationBrackets are screwed into place in the side of the joist or from above with the top fix version; the front of the bracket has a slo..

£7.91

Ex Tax:£6.59

Top Rafter Gutter Brackets Floplast RR1

Top Fix Rafter BracketThese brackets are installed during the roofing process they simply nail or screw into the top of the roof joist before the roof coverings are added. They are easier to fit than other brackets due to easy access.How far apart do you put brackets for guttering?Rise and Fall gutter bracket spacing needs to meet the needs of the type of gutter used.MaterialsSteel brackets are galvanised to reduce rusting to ensure a long life span.UniversalTop fix brackets are universal, and a..

£7.87

Ex Tax:£6.56

Universal Rainwater Adaptor (D96)

Downpipe To Drain Connector (D96) provides essential underground drainage connectivity with universal compatibility for comprehensive rainwater management systems. This universal rainwater 110mm adaptor accepts 65mm square and 68mm round downpipes, offering versatile installation options that accommodate diverse downpipe configurations across residential and commercial properties. External rainwater downpipes can be connected directly to a surface water drain, depending on the design, via a gull..

£15.68

Ex Tax:£13.07

Underground Drainage Pipe 110mm 3m Plain - D043

£31.54

Ex Tax:£26.28