Accepts Rainwater Pipes up to 110mm diameter. To Cover Drains up to 300mm wide x 265mm.
Manufactured from durable Polypropylene.
Accepts 68mm circular downpipes.
Cutouts for 65mm Square/80mm & 110mm Circular pipes.
Cutouts for 32 & 40mm waste pipes in both the top and sides.
Wing tabs to secure to the wall.
Helps to prevent blockage of the gully grid from leaves or other debris.
Covers gully tops up to 300mm wide x 265mm..
110mm soil pipe cowl/vent . Lightweight Vent Terminal manufactured from PVC-U for strength and durability. Prevents birds- squirrels and large debris entering the soil system.
Strap On Boss 110mm pipe boss needs rubber see below and solvent weld. Lightweight Strap Boss manufactured from PVC-U for strength and durability. Creates a boss for 32mm (Quote 41571) or 40mm (Quote 89174) waste pipe directly in to the 110mm Soil Stack. Easy to work with and suitable for high temperature waste discharges.
(Picture shows black- grey supplied)...
Description: 110mm Soil Pipe Shoe. Lightweight Offset Bend manufactured from PVC-U for strength and durability. Easy to work with and suitable for high temperature waste discharges. The use of silicone lubricant on all seals will facilitate jointing.
Description: 110mm right angle bends 90 degrees spigot/socket. Lightweight Offset Bend manufactured from PVC-U for strength and durability. Easy to work with and suitable for high temperature waste discharges. The use of silicone lubricant on all seals will facilitate jointing.
Dimensions: 110mm / 90 degrees
Description: Gloss White Half Round 112mm Gutter converter, this allows you to connect Half Round 112mm Guttering to existing half Round Cast Iron guttering. Fitted with a rubber and clip at the end for the gutter and 2 clips and a nut and bolt to attached the cast iron side, it is recommended that you use a Roof and Gutter sealant to seal this joint (link below for sealant).
Description: Side rafter bracket for use on properties with overhanging tiles and exposed joists
Galvanised silver finishSide fix rafter gutter brackets are used when the eaves are exposed and the bottom and sides of the roof joist can be seen from below. Galvansied to reduce maintenance ...
Description: This bracket is nailed to the top of the joist for use on properties with overhanging tiles and exposed joists.
Galvanised Silver finish12 Gauge x 50mm Stainless Steel Fixings for Cast Effect downpipes. These fixing have been designed to blend with the look of cast iron effect fittings...
Description: Universal rainwater 110mm adaptor. Accepts 65mm square and 68mm round downpipe. External rainwater downpipes can be connected directly to a surface water drain or. depending on the design. via a gully trap to the underground drainage system.68mm downpipe x 110mm pipe adaptor - downpipe can be connected directly to drain pipes via this connector a gully or trap is still required below ground...