Description: 110mm Soil Pipe Shoe. Lightweight Offset Bend manufactured from PVC-U for strength and durability. Easy to work with and suitable for high temperature waste discharges. The use of silicone lubricant on all seals will facilitate jointing.
Silicone Lubricant Makes fitting the gutters into the joints very simple. Plus lots of other helpful purposes about the house.
Description: Everbuild All Purpose Silicone Spray makes fitting the gutters into the joints very simple. Plus lots of other jobs about the house.
• Silicone release agent for easing friction between two surfaces
• Non-stick and colourless
•Ideal for rubber gasket installation and for mould making industries
•Safe for use ..
RAL Colour: 7015
Product Length: 5m
Product Width: 150mm
Product Thickness: 9mm
Return Leg: 38mm
Accreditations: BSI Approved
Product Type: uPVC Smooth/Matte Slate Grey 9mm Reveal Liner
Other: Available in a range of colours including, Light Oak, White, Mahogany, Black, Rosewood, Irish Oak, Green and Cream, all of which are protected by 'Heat Shield Technology' to prevent warping or discolouration...
Description: This Gloss White 90º Gutter Angle joint, allows you to take your guttering around an internal or external corner of 90º. It is fitted with rubbers and clips at each end for a water tight seal. This corner joint requires gutter clips to be fitted to the gutter either side for support.
Description: Gloss White Half Round 112mm Gutter converter, this allows you to connect Half Round 112mm Guttering to existing half Round Cast Iron guttering. Fitted with a rubber and clip at the end for the gutter and 2 clips and a nut and bolt to attached the cast iron side, it is recommended that you use a Roof and Gutter sealant to seal this joint (link below for sealant).