Low Back 'P' Trap - D501

Black Round Gutters 112mm Stylish Gloss Black Half Round guttering, 4m long x 112 mm wide x 52mm depth.  Should be fitted at 1:350 fall for optimum flow rate. The most popular choice of gutter colour these black gutters are in a standard design which has been in use for many years the black half round gutter system in 4m lengths. This standard 112mm .Manufacturer:AquaflowColour: Black..

Gutter Black Half Round 2m 112mm  Stylish Gloss Black Half Round guttering, 2m long x 112 mm wide x 52mm depth.  Should be fitted at 1:350 fall for optimum flow rate. 2m lengths of black half round guttering standard size also available in 4m and 5m lengths.Manufacturer : AquaflowColour : Black...

 68mm Black Round 4m Down Pipe  68mm Gloss Black round 4-metre downpipe fits straight onto fittingsManufacturer: AquaFlowColour: BlackDimensions: 68 mm diameter x 4m length..

Black In Line Running Outlet Gloss Black In-Line Running Outlet for use with Floplast 112mm Half Round Guttering, connects to Floplast 68mm Downpipe.  Both sides fitted with Rubbers and Clips for a water tight seal. 112mm Black Gutter - In Line Running Outlet connects the guttering to the down pipes. This outlet is the inline version where water can flow in to it from both sides.Manufacturer : AquaflowColour : Black...

112mm Black Half Round Gutter External Stop End 112mm Gloss Black Half Round Gutter External Stop End, fits directly on to the end of Floplast 112mm half round guttering. They are fitted with rubber and clip for a watertight seal.Colour: Black..

White Square To 112mm Half Round Adapter (RDS1W)Use to join plastic 114mm square gutter onto plastic 112 mm Half Round guttering.Colour: White ADS1..

White Round to Cast Iron Adapter (RD5W)Gloss White Half Round 112mm Gutter converter, this allows you to connect  Half Round 112mm Guttering to existing half Round Cast Iron guttering. Fitted with a rubber and clip at the end for the gutter and 2 clips and a nut and bolt to attached the cast iron side, it is recommended that you use a Roof and Gutter sealant to seal this joint (link below for sealant).Colour: White..

Side Rafter Gutter Brackets (RR2) GalvanisedSide rafter bracket for use on properties with overhanging tiles and exposed joist Galvanised silver finish. The rafter bracket can be used with round square and deep flow systems. The fall of the guttering can be adjusted via the bracket making installation easier.It is supplied with a bolt wing nut and washer.InstallationBrackets are screwed into place in the side of the joist or from above with the top fix version; the front of the bracket has a slo..

Top Fix Rafter BracketThese brackets are installed during the roofing process they simply nail or screw into the top of the roof joist before the roof coverings are added. They are easier to fit than other brackets due to easy access.How far apart do you put brackets for guttering?Rise and Fall gutter bracket spacing needs to meet the needs of the type of gutter used.MaterialsSteel brackets are galvanised to reduce rusting to ensure a long life span.UniversalTop fix brackets are universal, and a..

Downpipe To Drain Connector (D96) provides essential underground drainage connectivity with universal compatibility for comprehensive rainwater management systems. This universal rainwater 110mm adaptor accepts 65mm square and 68mm round downpipes, offering versatile installation options that accommodate diverse downpipe configurations across residential and commercial properties. External rainwater downpipes can be connected directly to a surface water drain, depending on the design, via a gull..

Underground 110mm Drainage Pipe Plain 3-metres Underground Drainage Systems are designed for use in gravity drainage and sewerage installations at depths of up to ten metres. Composition plastic drainage pipes and the majority of fittings are manufactured from un-plasticised Polyvinyl Chloride (uPVC). Colour Golden Brown (not UV resistant) Pipes and fittings for underground use are manufactured in golden brown/Terracotta. 110mm Ground drain pipe 3m plain - D043 All underground pipe and fitti..

110mm Drainage Pipe Socketed 3mUnderground Drainage Systems are designed for use in gravity drainage and sewerage installations at depths of up to ten metres. Composition All drainage pipes and the majority of fittings are manufactured from un-plasticised Polyvinyl Chloride (uPVC).Colour Pipes and fittings for underground use are manufactured in golden brown/terracotta.110mm underground drain pipe 3m socketed - D143 All underground pipe and fittings are manufactured to BS4660/EN1401-..

110mm Under Ground Pipe Coupling Single SocketPipe coupling joint with a single push-type socket. Suitable for gravity drainage and sewerage installations at depths of up to 10-metres. To be solvent welded to plain ended pipe leaving a push-fit joint. Strong durable uPVC. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing.BS 4660 BS EN 1401-1 1998. Colour: Terracotta/Brown Diameter: 110mmFeatures ..

110mm Under Ground Pipe Coupling/Union Double Socket - D105Pipe Coupling Double Socket. Joins two plain-ended underground pipes together. Strong. durable uPVC. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing. BS 4660 BS EN 1401-1 1998.Colour: Terracotta/BrownDiameter:110mmFeatures Suitable for High-Temperature Waste DischargesFits 110mm Pipes Ring Seal Joints S..

110mm Under Ground Pipe Single Socket Bend 87.5° - D161Single Socket Bend 87.5 Degree. Socket to spigot. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing. Pipe uPVC.Colour: Terracotta/BrownDimensions 110mm / 87.5°Features Suitable for High-Temperature Waste Discharges Fits 110mm Pipes Ring Seal Joints Suitable for Gravity Drainage Sewerage Install to Depths of 10-metres..